Range Report...YUCK!

carguy · Post by **carguy** » July 21st, 2007, 1:33 pm

I suck!

I couldn't hit the side of a barn from the inside today!!

The adjustable sights on my Rossi 38 were "un-adjusted"...fixed that.

My Bulgy was perfection as always, I just shot poorly.

Then my CZ82 broke. The hammer will not drop onto the firing pin. I posted this in fixes, if you got a minute check it out and throw an opinion at me...I'm cleaning it as you read this.

I think my saftey broke...somehow...but I just don't know.

bzinggg · Post by **bzinggg** » July 21st, 2007, 4:38 pm

I've got an 82 that works great, but this is the only technical help I can give. The 83 and 82 are basically the same gun, mechanically.

b.

carguy · Post by **carguy** » July 21st, 2007, 4:57 pm

I need to find out the length of a CZ82 firing pin.

Mine is 1 and 20/32 inches long, wondering if it broke.

carguy · Post by **carguy** » July 21st, 2007, 8:32 pm

NORM SUTTON to the rescue...again.

It appears to be the firing pin broke from a pierced primer (the primer part is a guess but the pin is definitely length challenged now!

Thanks Norm...off to find a pin!

abwehr · Post by **abwehr** » July 22nd, 2007, 3:51 am

Well Guys.........Another Three Cheers for our Master Gunsmith.........Norm Sutton

I will say it again, Norm is the "The Rock" for this Forum. Oh yea, don't let everyone know, but he is one heck of a nice guy too!

carguy · Post by **carguy** » July 22nd, 2007, 9:52 am

+1

My problem is once we decide the fix on whatever the call was about...we never hang up...I had Norm on the phone for over an hour just talking about this crazy addiction of ours!

The Unofficial P64 Resource Forum