PA-63 SPRING IN P-64

saands · Post by **saands** » December 11th, 2006, 1:17 am

Norm,

Is this a mod that you have already tested? How did it work for you? Do you have any way of verifying the strength of the spring that you end up with?

TIA,

Saands

Post by **normsutton** » December 11th, 2006, 6:57 am

Saands
YES
GOOD
NO

saands · Post by **saands** » December 11th, 2006, 12:25 pm

Great! I just ordered a pair from Wolff and will measure them ... this design is right on the edge of what is possible so if you have found a winner, I'm all for using them. Too bad Wolff doesn't offer bulk prices on the recoil springs like they do on the mainsprings.

Thanks for the tip,
Saands

Post by **normsutton** » December 11th, 2006, 5:09 pm

saands

YOU HAVE PM

saands · Post by **saands** » December 30th, 2006, 3:13 pm

Norm ... you have e-mail

Saands

Post by **normsutton** » December 31st, 2006, 9:16 am

GUYS

I have a print out on this spring change SAANDS did the wording and I did the pictures and I have 2 springs out to two members that are trying these springs in their guns .
I won't be making these springs to sell because of cost but if it's alright SAANDS I will email
instruction to you if you want one email me NORMSUTTON@AOL.COM subject recoil springs

thank you SAANDS for all your help with this
I hope this will be a good fix for the recoil spring untill wolff starts making one

Post by **normsutton** » January 15th, 2007, 2:33 pm

Haven't heard anything form the guys that i gave the springs to
but if anybody wants a copy of the plans email me and I'll send you a copy there free

you will have to order a 15# Pa-63 from Wolff

The Unofficial P64 Resource Forum