Broken Disconnector

cheytac · Post by **cheytac** » June 30th, 2009, 4:17 pm

Hey All.

First post.

I just picked up a P-64 and it appears the disconnecter is broken.

Can anyone confirm this?

What effect will this have on the function of the weapon.

I need to know how angry I should be when I talk to the guy I bought it from.

davebaird · Post by **davebaird** » June 30th, 2009, 5:16 pm

Yes, it is broken and very difficult part to locate. Take it back. I'm sorry!

cheytac · Post by **cheytac** » June 30th, 2009, 9:56 pm

Unfortunately I bought it from a private party. I doubt he wants it back either.

stover · Post by **stover** » June 30th, 2009, 10:03 pm

It disconnects the trigger bar when the safety is engaged. Without the part, I assume your trigger tries to move the hammer while on safe. The safety also blocks the firing pin. So, other than potentially breaking more parts if you pull the trigger while on safe, I don't think it will prevent the gun from functioning.
Not sure though -- good question to have answered on this board.

stover · Post by **stover** » June 30th, 2009, 10:06 pm

Should be easy enough to Fabricate a replacement too.

searcher36 · Post by **searcher36** » June 30th, 2009, 10:38 pm

I'm the guy he got the P-64 from. I wasnt aware of the problem. I will take it back no problem.

Rob

cheytac · Post by **cheytac** » June 30th, 2009, 10:50 pm

Yeah. We're working that out now and I sure do appreciate the effort.

I'm just trying to do a little learning here too searcher. If it will still function safely without the disconnect I may still use it while still looking for one..

The key word here is safely though. I don't want it going rock and roll on me.

cheytac · Post by **cheytac** » June 30th, 2009, 11:31 pm

Problem solved. Thanks searcher.

The Unofficial P64 Resource Forum