CZ-52 Not Firing

[sdoyl123]

I just picked up a Cz-52, and when fired the pin just makes a lite dent on the primer. Is there a easy fix for this?

[msgttbar]

When Makarov.com was still in business, this was easy. Now, I don't know. Sounds like a weak spring or broken FP. I have no suggestion as to where to find either one. Good luck. You might try cleaning the firing pin channel also.

[pshootr]

CZ-52 parts & instructional video:
http://www.gunpartswarehouse.com/cz52.htm

CZ-52 Exploded View:
http://makarov.com/graphics/cz52/cz52part.jpg

Lots of CZ-52 parts here:
http://www.buymilsurp.com/pistol-parts- ... 46_54.html

And here:
http://www.surplusbunker.com/index.php? ... x&cPath=54

[normsutton]

CZ52 New Production Replacement Firing Pin

416 Stainless Steel $24.95



http://www.floridaammotraders.com/



NORM

[protector]

I replaced my CZ52's pin with Joe's(Gun Parts Warehouse). Same factory design,but harder steel(I wanted to be able to use the de-cocking function on the safety lever) If you are shooting the foreign ammo,they are berdan primed( extra hard primers) sometimes I have to cock the hammer twice to fire!! Nature of the beastys!!

[sapo60]

Busted firing pin or bent, about to break..................Easy fix.