Slide action

crzbiker · Post by **crzbiker** » July 2nd, 2008, 8:17 pm

I recently changed out the springs in my P64. Recoil spring is now 20 lb and trigger is 18. It is, of course, much easier to fire. However, every once in awhile the slide goes forward after the last round is fired rather than staying open. Probably about once in 20 or so rounds. Springs the problem? :'(

pshootr · Post by **pshootr** » July 2nd, 2008, 9:17 pm

Did this happen before you changed the springs?

Post by **normsutton** » July 3rd, 2008, 4:53 am

crzbiker

that has has to do with the slide stop

pix of P-64 with slide stop spring out

pix of PA-63 with slide stop spring in place

they take the same slide stop spring

could also be the slide stop on the mag maybe worn

NORM

crzbiker · Post by **crzbiker** » July 4th, 2008, 11:28 am

Thanks for the quick info. To answer: it did not occur before I changed springs and I will check the slide stop spring. Thanks again.

The Unofficial P64 Resource Forum

Slide action

Slide action

Slide action

Slide action

Slide action