Christmas in April

electross · Post by **electross** » April 8th, 2008, 5:20 pm

Yahoo! I just purchased a P64 from MCS Firearms. Its a 1973 model. Can't wait. Illinois to Ohio shoudn't take too long to get here. I'm waiting for a call from a local Gun Shop to tell me its in and ready for pick up. now there's recoil springs and hammer springs to buy. My friends, I am living the high life. Pix will come as soon as I get it picked up.

torpeau · Post by **torpeau** » April 8th, 2008, 5:44 pm

Yahoo! I just purchased a P64 from MCS Firearms. Its a 1973 model. Can't wait. Illinois to Ohio shoudn't take too long to get here. I'm waiting for a call from a local Gun Shop to tell me its in and ready for pick up. now there's recoil springs and hammer springs to buy. My friends, I am living the high life. Pix will come as soon as I get it picked up.

I think MCS gives you enough info when they ship that you can figure out its arrival date. I have never waited for someone to call me to tell me a gun has arrived.

protector · Post by **protector** » April 8th, 2008, 5:47 pm

Congratulations,guaranteed to be one of your favorites,recommend changing out the hammer spring as the factory spring takes the strength of King Kong on D/A pull!!!www.gunsprings.com.

fritzhund · Post by **fritzhund** » April 8th, 2008, 5:53 pm

I'm sure you will like it, that's why I suggested MCS be listed as a recommended source to get them.

I bought four from them and they are all like new.

fritzhund

electross · Post by **electross** » April 8th, 2008, 6:11 pm

torpeau,
I'm going through a local gun shop on their FFL. I'm sure it won't take long to get from MCS to the Gun Shop. Until it gets there, I wait. Fritzhund , it was off of your recommendation that I browsed their site. Looked at everything they had as best as I could and selected. I hope I chose wisely. I have not heard of anything but good things about MCS and any communication to them has been handled well. I don't have time to visit the gun shop everyday so when it gets there, he'll call, I'll pick it up then I'll have more news. Until then I'll wait!

electross · Post by **electross** » April 11th, 2008, 7:36 am

The P64 shipped yesterday, (Thursday) and I should be able to pick it up tomorrow. ;D

dwd · Post by **dwd** » April 11th, 2008, 9:16 am

Does Wolff springs not make a recoil calibration pac for the p-64 like they do for the PA-63 and the cz-82? Went order springs and now I don't know what recoil spring to order for my p-64. What do i do?

donnerwetter58 · Post by **donnerwetter58** » April 11th, 2008, 9:27 am

dwd,
Wolff makes recoil and hammer springs for the P-64.
You can get a hammer spring package consisting of an 18, 19 and 20 lb.hammer springs.
The recoil springs are sold separately. Most common replacement recoil spring is the 20 lb. A 22 lb. is also available. The 22 lb may require flattening of the end coils to fit. The 22 lb.also makes it a bit difficult to rack the slide.
Most popular combination is the 18 lb. hammer spring and the 20 lb. recoil spring.
The P-64 is listed on the Wolff site under Radom...the manufacturer of the P-64

Post by **normsutton** » April 11th, 2008, 9:28 am

dwd

yes WOLFF makes springs for the P-64 and CZ-82
http://www.gunsprings.com/SemiAuto/1ndex_menu2NOF.html
CZ-82
http://www.gunsprings.com/SemiAuto/CZNF.html#CZ82

P-64
http://www.gunsprings.com/SemiAuto/PolishNF.html
NORM

The Unofficial P64 Resource Forum