Good news for those needing parts

manicmechanic · Post by **manicmechanic** » September 10th, 2007, 4:29 pm

I e-mailed TG International about a safety/decocker and low and behold, the original importer has some parts for these little beauties. I saw them posting on the new Gunboards site, so I figured it couldn't hurt. Who'd a thunk? Here's a link to their site. http://www.tnguns.com/warehouse/
Here's the info on the salesman you will probably need to talk to:
Bill Trent
Senior Tech. Adv
865.977.9707 x 25 p
865.977.9728 f
e-mail to: Sales@tnguns.com

trent · Post by **trent** » September 10th, 2007, 11:53 pm

wow thanks!!!

manicmechanic · Post by **manicmechanic** » September 24th, 2007, 12:46 pm

Just saw this on the gunboards forum.

http://forums.gunboards.com/showpost.ph ... ostcount=7

I talked with Bill and he said they also had some Rh grips, so I had him send me a set. I did receive the safety/decocker from him last week, good people. They will also send you a hard copy version of the owners manual that is on our home page here. I've got one of those coming too.

stibnite · Post by **stibnite** » October 1st, 2007, 9:16 pm

I see that they now have a section for P-64 parts:

http://www.tnguns.com/warehouse/index.p ... x&cPath=19

But no parts. >:(

manicmechanic · Post by **manicmechanic** » October 3rd, 2007, 6:59 pm

Looks like they're slowly updating the site.

stibnite · Post by **stibnite** » October 10th, 2007, 12:36 pm

Yep, nice!!! :-*

I see they are selling the safety, good news for those with broken ones! $14.00

trent · Post by **trent** » October 11th, 2007, 12:08 pm

has anyone asked about "field repair Kits" yet? I know it was talked about somewhere around here

9x18shooter · Post by **9x18shooter** » October 12th, 2007, 8:28 am

They are adding more parts to the site. I just ordered some spare parts and exchanged emails with Bill. He said they have every part but the grip nuts. ;D

If you need something that is not on the site yet send them an email.

trent · Post by **trent** » October 12th, 2007, 9:02 am

watch someone come on here looking for grip nuts now

anjdrifter · Post by **anjdrifter** » October 12th, 2007, 9:12 am

Go to ace hardware in their little boxes .buy all you want then follow directions from Norm on "blueing". they dont have the little slash but the 3mm work.. by the way dont know if any of you noticedit or not put the nut on with the slot facing out it grips better dont know why but it works for me.

The Unofficial P64 Resource Forum