Initialisms or "What Does THAT Mean?"

Info, pictures, advice...
Post Reply
rick9plus
Member
Member
Posts: 69
Joined: August 16th, 2007, 7:10 pm

Initialisms or "What Does THAT Mean?"

Post by rick9plus »

A few days ago I mentioned that some of us newbies do not understand all the firearm and message board acronyms that you more experienced folks sometimes use.

I came across this glossary of acronyms (and added some that I know) and decided to post it for those of us that have not spent much time looking though gun sights or gun web sites.

5-0. Pronounced "five oh", it is slang for "police".

BG: Bad Guy. "I heard a BG break into my house, and grabbed my P-64."

BUG: Back up gun. A gun carried in addition to your primary weapon.

BTDT: Been There, Done That.

CCW: Concealed Carry Weapon.

CHP: Concealed Handgun Permit. See CWP.

CWP: Concealed Weapon Permit. See CHP.

C&R: Curios And Relics. A form of FFL license that only applies to certain firearms, such as those over 50 years old.

DAO: Double Action Only.

DOA: Dead On Arrival.

FFL: Federal Firearms License. A document required to be able to either purchase, receive, ship, possess, or otherwise engage in commerce with certain types of firearms. For example, only a FFL can sell and ship a pistol .
FMJ: Full Metal Jacket. A bullet encased in a metal jacket, which enhances penetration at a cost of expansion.

FTE: Failure To Eject. Usually refers to a "stovepipe", where the extractor fails to properly eject a spent casing from the chamber.

FTF: Failure To Feed or Failure to Fire. In the case of a Failure to Feed, this is common if you "limpwrist" the gun, as the slide may not compress the recoil spring far enough back as to allow a round to be stripped off the mag and into the chamber when the slide returns to battery. Also can mean Face To Face, which usually indicates a seller wanting to sell a gun to someone in person, as opposed to over the internet (see FFL).

HG: Hand Gun.

IMO: In my opinion.

IMHO: In my humble opinion.

IWB: Carrying a pistol holstered inside your waistband of your pants.

JHP: Jacketed Hollow Point. A bullet usually used for self-defense, as it expands in the target causing a larger wound channel.

JK: Just Kidding.

JSP: Jacketed Soft Point. A semi-jacketed round (the jacket does not extend to the tip), it has better penetration than a JHP, but less expansion. Conversely, it has less penetration than a FMJ, but better expansion. Not a very common round.

LEO: Law enforcement officer.

LG: Long Gun.

LMAO: Laughing My Rear Off.

LOL: Laughing Out Loud.

LR: Long Rifle.

MOA: Minute Of Accuracy. Used to describe how accurate a shot grouping a rifle can achieve.

OMG: Oh My Holyentity.

OTD: Out the door. Usually preceded by the price paid in total for a gun. "It cost me $350 OTD."

OWB: Carrying a pistol holsered outside the waistband of your pants.

POA: Point of aim. Where your sights are lined up on target.

POI: Point of impact. Where your bullet hits the target.

SA: Semi Automatic/Semi Auto.

SAO: Single Action Only.

SNS: Saturday Night Special. Usually refers to a "junk gun", i.e. a gun that is unreliable or of poor quality, yet available at a dirty cheap price.

S&W: Smith & Wesson. Gun manufacturer, this abbreviation is also commonly used when describing the .40 S&W caliber handgun round. May be referred to as "Short & Wimpy" by .45 purists.

TLDR: Too Long, Didn't Read. See BTDT.

Maybe this post will be TLDR, but I hope it helps someone.
Last edited by rick9plus on September 24th, 2007, 10:42 am, edited 1 time in total.
dolang1
Forum supporter
Forum supporter
Posts: 233
Joined: November 12th, 2005, 5:21 pm
Location: OKC

Initialisms or "What Does THAT Mean?"

Post by dolang1 »

Thanks, I'm glad I read it. I would like to add one that we used when I was in the ambulance business. DRT Dead right there. Later Don
carguy
Elite member
Elite member
Posts: 1229
Joined: March 2nd, 2007, 6:19 pm
Location: Massachusetts

Initialisms or "What Does THAT Mean?"

Post by carguy »

And one more addition..ROFLMAO: Rolling On Floor Laughing My A$$ Off. ;D
bzinggg
Forum supporter
Forum supporter
Posts: 487
Joined: May 30th, 2006, 2:17 pm
Location: Texas

Initialisms or "What Does THAT Mean?"

Post by bzinggg »

IIRC, POS......ETC.

Add edit: Now that some have had a chance to guess, the meanings:

"If I remember correctly", and, in relation to gun forums, "Piece of sh_t", certainly not parent over shoulder.

bZ.
Last edited by bzinggg on September 16th, 2007, 11:44 am, edited 1 time in total.
carguy
Elite member
Elite member
Posts: 1229
Joined: March 2nd, 2007, 6:19 pm
Location: Massachusetts

Initialisms or "What Does THAT Mean?"

Post by carguy »

Just remembered another one...IANAL: I Am Not A Lawyer...often used when giving "opinions".
bzinggg
Forum supporter
Forum supporter
Posts: 487
Joined: May 30th, 2006, 2:17 pm
Location: Texas

Initialisms or "What Does THAT Mean?"

Post by bzinggg »

ID, OD, LOP, and let us never forget USGI, MP, and LEO!

Add edit:

"Inside diameter", "Outside diameter", "Length of pull"

"United States Government Issue" (there is another very valid definition for that one; does anyone know it?)

"Military police", and "Law enforcement officer".
Last edited by bzinggg on September 16th, 2007, 11:50 am, edited 1 time in total.
himmel
Veteran member
Veteran member
Posts: 733
Joined: January 30th, 2006, 4:21 pm
Location: East Texas

Initialisms or "What Does THAT Mean?"

Post by himmel »

Also SOB--uhh, "Small of back" when I use it... "I carry my P64 IWB-SOB"
mamcdonald
Junior member
Posts: 24
Joined: August 20th, 2007, 7:40 pm

Initialisms or "What Does THAT Mean?"

Post by mamcdonald »

IANAL - I Am Not A Lawyer

lol

e:fb - edit: f***, beaten [to the punch at posting something]
Last edited by mamcdonald on September 24th, 2007, 10:45 pm, edited 1 time in total.
protector
Senior member
Senior member
Posts: 200
Joined: July 25th, 2007, 6:21 pm
Location: Pa.

Initialisms or "What Does THAT Mean?"

Post by protector »

FUBAR-We all know what this means!lol :(
Last edited by protector on September 16th, 2007, 5:11 pm, edited 1 time in total.
Aim small,hit small...
garry
Veteran member
Veteran member
Posts: 598
Joined: October 22nd, 2006, 7:45 am
Location: Grandview, Missouri

Initialisms or "What Does THAT Mean?"

Post by garry »

What is : TTY ?
G
torpeau
Senior member
Senior member
Posts: 219
Joined: September 20th, 2007, 3:35 pm
Location: Left Coast of FL

Initialisms or "What Does THAT Mean?"

Post by torpeau »

Actually, "initialisms." Acronyms are really pronounceable words like Nasa, Nato, radar, Fema, etc.
"The only time we see the middle of the road
is as we run from side to side." R.O. Clark
bzinggg
Forum supporter
Forum supporter
Posts: 487
Joined: May 30th, 2006, 2:17 pm
Location: Texas

Initialisms or "What Does THAT Mean?"

Post by bzinggg »

Actually, "initialisms." Acronyms are really pronounceable words like Nasa, Nato, radar, Fema, etc.
That is correct. An acronym is a word formed from the first, or first few letters of several words.

bZ.
Post Reply