The Unofficial P64 Resource Forum

I went to the range and upon firing my P64 it stuck with the slide open.

I had fired approx. 35 rounds through it. This was a test of the 20# recoil and 18# hammer spring. It functioned flawlessly with Sellier and Bellot ammo and suddenly sutck.

It will not budge...any ideas?

YES GIVE ME A CALL

NORM

Thank you for your help. Through frustration I might want to beat on this thing but I didn't expect you to tell me to! It did seem to work though.

Goodness knows why it stuck but now it's unstuck and ready for a good cleaning.

(and for you doubters, I had the recoil spring on the correct way with the narrower end over the barrel first, so we couldn't figure what got stuck)

Thanks again Norm!

8~)

Mine got stuck one time and I found out that I did not have the slide all the way down. When I put it back together, I messed up, never had a problem after that.

The trigger pin has a flat side & if it gets loose, it can jam the
slide big time -- I had that happen !

What do you mean by trigger pin?

Troy


dug had the trigger retaining pin upside down he is all start now


NORM