Safety dropping on while shooting
Safety dropping on while shooting
Walther PP safety plungers fit nicely. Check this thread: http://p64.proboards67.com/index.cgi?bo ... 933&page=1
Safety dropping on while shooting
I have had the same problem. I pulled the detent out and it was flat as a pancake. I sanded the flat end to a kind of point and used a 1/16 drill bit by hand to clesr any rough edges in the eye out. Installed and has not dropped out of safety since. Saands told me how to do it.
Re: Safety dropping on while shooting
Thanks for the info, and I'm 100% positive I am on another forum you are on.ohmysac wrote:Walther PP safety plungers fit nicely. Check this thread: http://p64.proboards67.com/index.cgi?bo ... 933&page=1
Re: Safety dropping on while shooting
This is the reason I started looking on this site. I'm so glad I'm not the only person this happens to. Now to take my baby apart again and see what I can find. Thanks for all the great responses.
Re: Safety dropping on while shooting
Thanks for "bumping" this thread Foo Bird.
I too had a safety that was too hard to engage/disengage. After a good cleaning and some powdered graphite (thanks Norm) everything is manageable. (Thankfully no grinding was necessary!)
Ross
I too had a safety that was too hard to engage/disengage. After a good cleaning and some powdered graphite (thanks Norm) everything is manageable. (Thankfully no grinding was necessary!)
Ross
Re: Safety dropping on while shooting
Thanks, guys! I was going to use an old drill bit for this caper since it's already hardened. Do appreciate the dimensions from saands.
-
- Posts: 4
- Joined: October 22nd, 2011, 12:53 pm
Re: Safety dropping on while shooting
Experienced the same problem on a 1975 P-64. Purchased a new plunger and spring from gunbroker.com, installed and works great. About $12 for the plunger/spring. Do like the way Norm built his plunger though... very cool.
-
- Posts: 2
- Joined: December 8th, 2011, 11:39 pm
Re: Safety dropping on while shooting
Does anyone take the manual safety off all together? Seems unnecessary with 20+ lb trigger pull.
Great forum by the way!
Great forum by the way!
Re: Safety dropping on while shooting
kilgore trout wrote:Does anyone take the manual safety off all together? Seems unnecessary with 20+ lb trigger pull.
Yea this guy did with almost deadly results.
viewtopic.php?f=1&t=4378
Laugh Hard and Often.
Gary
Gary
- juniustaylor
- Elite member
- Posts: 1408
- Joined: February 9th, 2010, 10:56 pm
- Location: KV, MO
- Contact:
Re: Safety dropping on while shooting
Kilgore, are you saying to completely remove the safety? Or are you just saying to keep it in the Fire position?
Mine stays in the Fire position all the time. However, I bobbed the hammer on mine so it does not stick out of the back of the slide.
Mine stays in the Fire position all the time. However, I bobbed the hammer on mine so it does not stick out of the back of the slide.
US Air Force Veteran - OEF/OIF
-
- Posts: 2
- Joined: December 8th, 2011, 11:39 pm
Re: Safety dropping on while shooting
I mean completely remove it. I only ask because I was reading Shooting to Live by Fairbairn and Sykes and they advocate permanently pinning the safety in the firing position and carrying the gun without a round in the chamber.
- juniustaylor
- Elite member
- Posts: 1408
- Joined: February 9th, 2010, 10:56 pm
- Location: KV, MO
- Contact:
Re: Safety dropping on while shooting
Interesting. I would just figure someone would want a round in the chamber. You may not have time to rack the slide, may "forget" it in a stressful situation, or a handful of other things. I would think it would seem simpler to get used to disengaging a safety which requires a movement of the thumb rather than racking the slide which requires both hands. I would guess that pinning the safety could be relative easy. If you couldn't get around it and had to drill into the slide, you could drill straight through the safety lever with the grooves on it, and into the slide. Tap the hole in the slide with a 4-40 or other small size and install a small set screw with an allen head on it. That way you could remove the 'pin' to restore function of the safety. It just seems odd since it's "Shooting to Live" but they want you to use more steps rather than flipping a safety to Fire. Maybe I'm missing the point.
US Air Force Veteran - OEF/OIF
- lklawson
- Senior member
- Posts: 469
- Joined: February 19th, 2011, 8:39 pm
- Location: Huber Heights, OH
- Contact:
Re: Safety dropping on while shooting
IMS, Shooting to Live was specifically addressed to the 1911 when it came to automatics (they did talk about a couple of revolvers as well). At the time, Condition 3 was SOP for automatics in the Military.
Peace favor your sword,
Kirk
Peace favor your sword,
Kirk
The Cheapskate's Guide to Gun Cleaning and Maintenance - "You shouldn't have to spend thousands of dollars on expensive gun cleaning an maintenance products. Find out how to save money with inexpensive alternatives that work just as well."
Re: Safety dropping on while shooting
I had the dropping safety problem in a 1975 p64. Thanks to the info I found here the fix was easy. I bought a new safety plunger from gunbroker. Thought I would share some photos to compare the parts.
This is the plunger that came out of my gun.
This is the new one from gunbroker
The two side by side
The spring I replaced with one out of a lighter.
Thanks guys
b
This is the plunger that came out of my gun.
This is the new one from gunbroker
The two side by side
The spring I replaced with one out of a lighter.
Thanks guys
b
Re: Safety dropping on while shooting
I also had a safety that was very hard to work (had to put on gloves to keep from hurting my thumb). Took it apart and lightly rounded the plunger just a little, lightly filed the edges of the detents, and decided upon puting it back together that the spring was too stiff for a detent spring. So I cut about 1 coil off the spring. Put it back together. The safety is still a little stiff to operate but nothing like it was. Seems to work fine. I just need to take it to the Gun club to check out.