Need herlp with P83 safety and firing pin removal

surfzombie · Post by **surfzombie** » February 5th, 2011, 12:50 pm

I just got a new to me P83 loaded in cosmo and would like to know how to take the safety and firing pin out of the slide to clean it properely and then put it back together. Has anyone here done this ? Any help would be appreciated.

juniustaylor · Post by **juniustaylor** » February 5th, 2011, 8:25 pm

I thought it was somewhat similar to the P-64. You can push the firing pin through the bolt face, and grab it with a pair of forceps. That allows you to work with both hands to work the safety out the side. ???

surfzombie · Post by **surfzombie** » February 5th, 2011, 8:57 pm

Thanks, I remember seeing a guide somewhere that show all the step of dis assembly of the P64 but can't find it. Do you have a link for it?

juniustaylor · Post by **juniustaylor** » February 5th, 2011, 10:54 pm

http://p64resource.com/board/P64_%20Assembly_Manual.pdf

juniustaylor · Post by **juniustaylor** » February 5th, 2011, 11:03 pm

Thought I had a good link for a video, but it was just showing how to take the slide off. Lame...

surfzombie · Post by **surfzombie** » February 6th, 2011, 2:27 am

I foumd Norms post here.

viewtopic.php?f=3&t=3368
I hope the P83 is the same.

The Unofficial P64 Resource Forum

Need herlp with P83 safety and firing pin removal

Need herlp with P83 safety and firing pin removal

Re: Need herlp with P83 safety and firing pin removal

Re: Need herlp with P83 safety and firing pin removal

Re: Need herlp with P83 safety and firing pin removal

Re: Need herlp with P83 safety and firing pin removal

Re: Need herlp with P83 safety and firing pin removal