The Unofficial P64 Resource Forum

Here's a tip for easily installing and removing the Handall grip without causing any damage.

viewtopic.php?f=3&t=2765&p=29653#p29653

Just a suggestion; put a few drops of Liquid Wrench penetrating oil (or similar) on the pin, put the slide in the freezer for an hour then slam it down briskly against a piece of wood laid down on a hard surface.

Good luck

Christoff... welcome! There is a gap maybe a few millmeters and the trigger does reset. pulling the trigger results in no strike to the primer. I manually worked the extractor and it doesn't seem to stiff, I oiled and cleaned the area and spring for the extractor. However, the only marks on the cas...

P-64s are currently listed in their latest Shotgun News ad.

www.royaltigerimports.com

Took it out to the range yesterday and ran another 50 rounds through it. Total of 100 rounds since completing the repair and it looks as though it's going to live!

Obviously this wasn't a big priority but, after almost three years, I finally got around to repairing the broken 'lug' on this P-64 slide! Here is a link to the original post from August, 2009. http://www.p64resource.com/forum/viewtopic.php?f=3&t=2821&p=30206#p30206 For anyone interested, he...

I began to experience some feeding issues and failures of the slide to lock back after the last round with one of my original P-64 magazines. Stretching the magazine spring was only a temporary solution to confirm the weak magazine spring diagnosis. I looked for a reasonably priced new replacement s...