Search found 69 matches
- March 4th, 2011, 7:58 am
- Forum: Other firearms...
- Topic: FEG PA 63 fails to cock
- Replies: 21
- Views: 18841
Re: FEG PA 63 fails to cock
To console myself I bought a FEG 380 yesterday. Now I have "Twins" a FEG 380 and a FEG SMC 918. Pictures to follow.
- March 3rd, 2011, 8:02 am
- Forum: Other firearms...
- Topic: FEG PA 63 fails to cock
- Replies: 21
- Views: 18841
Re: FEG PA 63 fails to cock
I already moved e-v-e-r-y part from #1 to # 2 with the same results. If I still had my venier caliper I would have mic'd the frame and slide to see if there was any substantial difference.
For now, #1 is a parts/future project gun.
For now, #1 is a parts/future project gun.
- March 1st, 2011, 1:36 pm
- Forum: General P-64 Discussion
- Topic: Interest in a new manufacture safety?
- Replies: 18
- Views: 13370
Re: Interest in a new manufacture safety?
I bought 2 saftey and firing pin sets from the Polish connection on GB. I figure that I'll just stick them in a drawer and hope I never need them. I own 2 P64's and they are, by far, my favorite carry piece. I would not want to become accustomed to these as a defensive weapon if I thought that I'd h...
- February 28th, 2011, 9:13 pm
- Forum: General P-64 Discussion
- Topic: Interest in a new manufacture safety?
- Replies: 18
- Views: 13370
Re: Interest in a new manufacture safety?
I did some checking in the Norfolk Va area with a few local machine shops - the cost was crazy. If you can get them for under $100 a piece you're doing GREAT.
- January 29th, 2011, 9:35 pm
- Forum: Photo Gallery
- Topic: My PA 63
- Replies: 2
- Views: 3905
Re: My PA 63
The holster is stamped "Front Line" and it came with the gun as a package deal. It obviously fits the PA 63 but my P 64 and SMC 918 also fit it and the IWB black holster that is in the pic.
- January 29th, 2011, 4:59 pm
- Forum: Photo Gallery
- Topic: My PA 63
- Replies: 2
- Views: 3905
My PA 63
For those of you who may have been following my "PA 63 Fails to Cock" discussion I thought I'd throw in a few pictures of #2 - the gun that works.
- January 29th, 2011, 4:52 pm
- Forum: Other firearms...
- Topic: FEG PA 63 fails to cock
- Replies: 21
- Views: 18841
Re: FEG PA 63 fails to cock
Well I took #1 and #2 to the range today. I had all of #1's parts in #2 and vice versa. #2 shot fine - #1 still would not cock. I am at a total loss on this.
- January 2nd, 2011, 9:29 pm
- Forum: Other firearms...
- Topic: FEG PA 63 fails to cock
- Replies: 21
- Views: 18841
Re: FEG PA 63 fails to cock
I swapped the sear pins out and took #1 and # 2 to the range. #1 still had the same issues. #2 fired flawlessly with #1's sear pins. I did notice that the trigger bar on #2 appeared to have more mass on the lug that fits into the sear notch than #1. I will swap out the trigger bar and let you know.
- December 21st, 2010, 1:44 pm
- Forum: Other firearms...
- Topic: FEG PA 63 fails to cock
- Replies: 21
- Views: 18841
Re: FEG PA 63 fails to cock
My apologies to everyone who has offered advice and may be waiting for feedback. I haven't had time to try any repairs - I had to relocate my restaurant (lease issues) and didn't go to the range for 3 months. Just now starting to get back to a normal schedule when Christmas snuck up on me. I promise...
- June 21st, 2010, 6:41 pm
- Forum: Other 9x18's
- Topic: SMC 918 Arrival Inspection and Range Report
- Replies: 4
- Views: 4208
- June 21st, 2010, 6:31 pm
- Forum: Other 9x18's
- Topic: SMC 918 Arrival Inspection and Range Report
- Replies: 4
- Views: 4208
- June 20th, 2010, 8:47 pm
- Forum: Other 9x18's
- Topic: SMC 918 Arrival Inspection and Range Report
- Replies: 4
- Views: 4208
SMC 918 Arrival Inspection and Range Report
Received the gun on June 18th. First inspection revealed what appeared to be a low round count, pristine pistol. As soon as I checked the safety I realized that I had a problem - it wouldn't move. I got home, disassembled the gun and found a burr on the safety barrel. A few minutes with a jeweler's ...
- June 16th, 2010, 7:22 pm
- Forum: Other 9x18's
- Topic: FEG SMC 918
- Replies: 12
- Views: 10557
Re: FEG SMC 918
Knowing my luck a rare aluminum oxidizer will infest it with a by-product that eats plastic.
- June 16th, 2010, 7:12 am
- Forum: Other 9x18's
- Topic: FEG SMC 918
- Replies: 12
- Views: 10557
Re: FEG SMC 918
Just got an update from the World's Greatest Postal Service - the "package" was picked up on the 11th and actually processed through their facility on the 15th. I hope they packed this gun in cosmoline 'cause at this rate it'll be a rusted clump by the time it gets here. Okay - I'm venting.
- June 13th, 2010, 8:01 am
- Forum: Other 9x18's
- Topic: FEG SMC 918
- Replies: 12
- Views: 10557
Re: FEG SMC 918
I'll post pictures when I receive the gun. An old man in flip flops is walking it here from California (U.S. Postal Service).