Discussion on reloading the 9x18 and any other cartridge
MJ1
Member
Posts: 58 Joined: May 3rd, 2016, 6:57 pm
Post
by MJ1 » November 29th, 2017, 11:22 am
Powders used and bullets found to work well I'm slowly amassing information and collecting an assortment of components and formulas. Information what little there is doesn't follow any fixed path. It's all over the place.
Cheers
..MJ..
BeoBill
Member
Posts: 85 Joined: March 16th, 2016, 9:42 pm
Location: Maryland
Post
by BeoBill » December 8th, 2017, 6:06 pm
Try ammoguide.com, join (cost is nominal) and do a search. There are MANY recipes. Searching drove me nuts before I discovered the site.
Powder manufacturers' sites often have recommendations as well.
Best of luck!
normsutton
Global moderator
Posts: 3575 Joined: February 26th, 2006, 6:59 am
Location: LAKELAND FL.
Post
by normsutton » March 31st, 2018, 11:43 am
I load for the 7.62 x 25 use 223 cases cut them down , resize them , use cast lead bullets in them too ,
load is
7.62 X 25
6 grn's of W231
87 grn lead bullet
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
BeoBill
Member
Posts: 85 Joined: March 16th, 2016, 9:42 pm
Location: Maryland
Post
by BeoBill » December 2nd, 2018, 9:13 pm
Here are my go-to loads:
(all using new Starline brass, CCI primers and 5.6 gr of HP-38):
85 gr. PPU JHP: good; fairly accurate
100 gr Hornady SJ: Surprisingly accurate and mild recoil.