The Unofficial P64 Resource Forum

SAW RECOMMENDATION FOR BROWNELL BLUING PRODUCT ON THE BOARD. WONDERING IF IT REQUIRES ANTI-RUST AFTER COAT LIKE SHEATH OR SOME OTHER PROTECTANT

all I use is break-free... that is after I do the bluing a few times use good old wd40 to set the blue then clean off after acouple of hours then use the bf... there are many more here who are much better then I sure you will get great info

brm

I use WD 40 to clean then wipe down with 20/50 ,10/30 is good too

NORM