The Unofficial P64 Resource Forum

My first P64. It came to me with a buggered-up Trigger Return Spring. I replaced it, now I believe I'm having issues with the Trigger Bar / Sear engagement. It will successful drop the hammer sometimes, but it quite often will also not return the Trigger to the full forward position. When this occurs the Trigger can be pulled and it free wheels, still springs forward but the Trigger Bar appears to not re-engage the Sear. It will re-engage when I force the Trigger to full forward stop.

It also refuses to function in double action.


Does anyone heave experience with this issue?

Welcome to the forum

If you got it from a gun dealer recently like Aim or Classic I would seriously consider calling them to have it replaced.

If not then a search on disconnect or or trigger reset will pull up a bunch of posts on those problems.

Thank you for the welcome aboard and the search strings. I will check it out.

go down to pix 8 if you don't have the trigger return spring like this its not going to work
viewtopic.php?f=6&t=1821

NORM
"A gun is like a parachute. If you need one, and don't have one, you'll probably never need one again."