P64 DA problem
-
- Posts: 1
- Joined: January 14th, 2013, 3:16 pm
P64 DA problem
New to the site. Looked at some of the old posts concerning DA problems but was wondering if there was any new info out there. On one of my P64s sometimes I have to pull the trigger 2 or 3 times before the hammer moves. Fires fine SA. Any thoughts
- fully machined
- Member
- Posts: 162
- Joined: August 14th, 2011, 11:14 pm
Re: P64 DA problem
Try it with the slide off, but be careful not to let the hammer drop. This may help to see if you have disconnector problems.
Re: P64 DA problem
Welcome to the forum. DiId you happen across this post and the links provided?
If not this would be a good place to start.
viewtopic.php?f=3&t=5019&p=47314&sid=2c ... 62a#p47314
If not this would be a good place to start.
viewtopic.php?f=3&t=5019&p=47314&sid=2c ... 62a#p47314
Laugh Hard and Often.
Gary
Gary
Re: P64 DA problem
have you looked at where the trigger bar catches the spur on the hammer. i had one where the previous owner must have filed down the edge on the bar. so that when the trigger was pulled you could feel when the bar was tryng to catch the spur, but it would let go.