Page 1 of 1

Sholder Holster w/thumb break

Posted: October 23rd, 2012, 4:32 pm
by Boston Boy
Hiya! Anyone know where I can get a shoulder holster w/thumb break? I'm a long time CZ82 guy who has changed over to the P64. Can't beat this little pistol, it is great!

Re: Sholder Holster w/thumb break

Posted: October 25th, 2012, 12:34 am
by rickn8or

Re: Sholder Holster w/thumb break

Posted: October 25th, 2012, 8:19 am
by Boston Boy
Thanks rickn8tor,

This military holster is just a bit too large for my purposes. I was thinking of a smaller holster with X shaped straps.

Re: Sholder Holster w/thumb break

Posted: October 25th, 2012, 3:16 pm
by dfunk
You could buy the harness and have the holster made for it
http://www.ebay.com/itm/Galco-SSH-Shoul ... 2c694e0161

Re: Sholder Holster w/thumb break

Posted: February 15th, 2013, 11:34 pm
by Thor
I use a Galco Classic Lite that I ordered to fit a Walther PPK/S. You can see in the pic where I relocated the tension adjuster to accommodate the larger trigger guard on the P64. With this minor adjustment the holster is a perfect fit.

Re: Sholder Holster w/thumb break

Posted: February 16th, 2013, 12:40 am
by Curly1
Thor yer pic isn't showing.

Re: Sholder Holster w/thumb break

Posted: February 24th, 2013, 1:46 am
by Thor
Here is a second effort to show the slight alteration for my holster. Hopefully it works this time.

Re: Sholder Holster w/thumb break

Posted: February 24th, 2013, 2:06 am
by Thor
The alteration I made is pretty simple. I just removed the tension adjuster and then placed my P64 in the holster with the thumb break closed then just reinstalled the tensioner where it fit.

Re: Sholder Holster w/thumb break

Posted: February 24th, 2013, 10:27 am
by Curly1
Pic still isn't showing.

Re: Sholder Holster w/thumb break

Posted: February 24th, 2013, 3:05 pm
by Thor
Well, I've tried two different pics so, if they are not working for you then nothing I have will. The instructions I gave are pretty simple to follow. There is only one piece on the holster other than the shoulder rig that is removable and, that is the tensioner. All I did was move the tensioner to make room for the trigger guard since the P64 has a longer one than the PPKS.

Re: Sholder Holster w/thumb break

Posted: April 4th, 2013, 3:50 am
by karenbruce
It is nice to see if the pic is shown than to read what has has been picture out.

Re: Sholder Holster w/thumb break

Posted: April 5th, 2013, 10:52 am
by brianb
I just recently got a leather should rig off ebay from this outfit overseas, if you don't mind waiting for shipping (about 2-3 weeks) then its a pretty good buy in my opinion. It's specific for the PPK, but my P-64 fits in there like a glove. Total cost with shipping was under $50. I am pretty happy with mine. Let me know if you are interested and I can post some pics and give you the ebay name.

Re: Sholder Holster w/thumb break

Posted: April 5th, 2013, 3:06 pm
by Curly1
Welcome to the forum Brian and Karen.

Yes start a new thread with pics and a link for our viewing pleasure.