Page 1 of 1
Dry Firing
Posted: December 9th, 2008, 12:19 am
by spiralarchitect
I know know on some pistols dry firing will total the firing pin, and on others it doesn't. Is the P64 safe to dry fire?
Dry Firing
Posted: December 9th, 2008, 6:10 am
by normsutton
spiralarchitect
not with out snap caps some the safeties have broken form dry firing
NORM
Dry Firing
Posted: December 9th, 2008, 8:07 pm
by primarchbentley
With makarov.com out of business, where would be a good source for 9x18mm snap-caps? Not exactly an 'off the shelf' size at most places...
Dry Firing
Posted: December 9th, 2008, 9:28 pm
by blacktop
Dry Firing
Posted: December 10th, 2008, 12:29 am
by oppy
I have purchased a pack of A Zoom previously from Ebay for $14.50, but shipping was nearly 5.75.
Seller is Lippmann Enterprises I think.
Dry Firing
Posted: April 28th, 2009, 7:21 pm
by jbabbler
A spent casing works fine for a snap cap as well.
Dry Firing
Posted: April 28th, 2009, 9:57 pm
by tomek
i made snap cap myself using empty case. i removed primer. next i made "primer" from rubber and glued into case. bullet i carved from wood. it works fine for me.