SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 6:58 am
THESE ARE MINE
NORM
NORM
Page 1 of 4
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 9:37 am
Norm is that bottom SKS one with the side mounted dovetail? I have one and have been looking for that slide on scope mount for years. Should have bought one when I got the SKS back in the 80's. They were only $35 then with the 4x scope. I have seen them for about $200. Way too much for me.
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 9:52 am
9x18shooter
NO its a Choate Scope Mount SKS I got it from
http://www.midwayusa.com/eproductpage.e ... mid=435151
if I had to do it over again I think I'd get one of these http://www.ssmedwi.com/scope%202.JPG
from http://www.ssmedwi.com/
NORM
NO its a Choate Scope Mount SKS I got it from
http://www.midwayusa.com/eproductpage.e ... mid=435151
if I had to do it over again I think I'd get one of these http://www.ssmedwi.com/scope%202.JPG
from http://www.ssmedwi.com/
NORM
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 2:18 pm
Choate is the drill and tap mount. I have thought about that also. That link looks like a Mosin scope.
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 2:46 pm
9x18shooter
yes on both
the one that go on the recver cover don't hold zero very well
NORM
yes on both
the one that go on the recver cover don't hold zero very well
NORM
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 3:05 pm
Here are mine, I thought no one would ever ask..... ;D.....thanks Norm.
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 3:19 pm
papabear
That's one super fine collection
NORM
That's one super fine collection
NORM
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 3:31 pm
Papabear,
That is a very impressive collection of rifles. Looks like you have a gun museum in the making. If the cheese ever hits the fan you could arm have your neighborhood.
That is a very impressive collection of rifles. Looks like you have a gun museum in the making. If the cheese ever hits the fan you could arm have your neighborhood.
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 5:29 pm
Papabear, I have some property near Beattyville and always thought if SHTF I would go there. I think I may need to go further west and hook up with you. 
Nice collection. ;D ;D
I have been thinking about getting a Mosin as the Chinese SKS is all I have in milsurplus.
Nice collection. ;D ;D
I have been thinking about getting a Mosin as the Chinese SKS is all I have in milsurplus.
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 5:54 pm
mosins are great, it is so hard to miss with one of those rifles (and they are very economical)
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 6:04 pm
looks like you got this one from Mitchells mausers
[IMG]
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 9:31 pm
Trent,
Actually that is a Yugo M48 that I refinished the stock, it was really dirty and oily, and I stripped it and stained it in a lighter finish, the metal was in EX condition, but the stock was nasty, but a few hours of pure love and there "she" blows............ ;D I could never pay $300 + for a Yugo M48 or a M48A.........just my $0.02 worth.
papabear
Actually that is a Yugo M48 that I refinished the stock, it was really dirty and oily, and I stripped it and stained it in a lighter finish, the metal was in EX condition, but the stock was nasty, but a few hours of pure love and there "she" blows............ ;D I could never pay $300 + for a Yugo M48 or a M48A.........just my $0.02 worth.
papabear
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 9:54 pm
well it looks like $300 there, excelent job!
SHOW YOUR C&R RIFLES
Posted: June 24th, 2007, 11:44 pm
OK guys, here is my problem,
I bought a M44 Mosin Nagant in excellent condition, unissued and still in ,here is the bad part, COSOMOLINE! When it arrived the preservative on the barrel was starting to flake off, and I thought that it would be a simple task to clean. At some of the web site forums I here tails of folks going through a job of work to get them cleaned up and cosmoline free. Is there some where I can go to get instructions on how to get the stuff off of and out of the rifle? Any help would be appreciated!
G.R.
I bought a M44 Mosin Nagant in excellent condition, unissued and still in ,here is the bad part, COSOMOLINE! When it arrived the preservative on the barrel was starting to flake off, and I thought that it would be a simple task to clean. At some of the web site forums I here tails of folks going through a job of work to get them cleaned up and cosmoline free. Is there some where I can go to get instructions on how to get the stuff off of and out of the rifle? Any help would be appreciated!
G.R.
SHOW YOUR C&R RIFLES
Posted: June 25th, 2007, 4:55 am
G.R.
HERE ARE SOME WAYS
http://www.surplusrifle.com/shooting/co ... moline.pdf
http://www.sksboards.com/smf/index.php?topic=4628.0
pick a way that suits you
I like to use paint stipper and hot water and soap wash of the paint striper
at the same time it raises the grain of the wood and pulls out a lot of the dents in the wood
NORM
HERE ARE SOME WAYS
http://www.surplusrifle.com/shooting/co ... moline.pdf
http://www.sksboards.com/smf/index.php?topic=4628.0
pick a way that suits you
I like to use paint stipper and hot water and soap wash of the paint striper
at the same time it raises the grain of the wood and pulls out a lot of the dents in the wood
NORM