Page 1 of 2
TRIGGER RETURN SPRING
Posted: March 21st, 2006, 7:15 pm
by normsutton
Now that I have my P-64's I can make the trigger return spring instead of looking all over the place looking for one you can email me if they need one they are made from .032 stainless steel dental wire the first 5 are free one per person
TRIGGER RETURN SPRING
Posted: March 22nd, 2006, 12:20 am
by b52stan
Norm,
Thanks for the kind offer.
Sent you an email requesting one.
Stan
TRIGGER RETURN SPRING
Posted: March 22nd, 2006, 6:21 am
by normsutton
STAN
Its on its way and tell me what you think, they work in mine ,these are hand bent I think you will like it . GOT TO KEEP THESE GUNS SHOOTING
NORM
TRIGGER RETURN SPRING
Posted: March 22nd, 2006, 7:12 am
by abwehr
NORMSUTTON,
This is a very nice gesture, and I know the guys do appreciate your efforts!
TRIGGER RETURN SPRING
Posted: March 22nd, 2006, 10:09 am
by popeye
Norm: I would like one of the springs if you have any left.Thanks very much.Email sent
TRIGGER RETURN SPRING
Posted: March 22nd, 2006, 5:26 pm
by normsutton
POPEYE
It will be on it's way tomarrow 23 MAR 06
NORM
email address
NORMSUTTON@AOL.COM
TRIGGER RETURN SPRING
Posted: March 24th, 2006, 5:54 am
by normsutton
ABWEHR
just trying to my part, and help when I can . You got the best group of people on this forum that I have seen in a long time.
THANKS ALOT
NORM
TRIGGER RETURN SPRING
Posted: March 29th, 2006, 1:20 pm
by tunnelrat
Now that I have my P-64's I can make the trigger return spring instead of looking all over the place looking for one you can email me if they need one they are made from .032 stainless steel dental wire the first 5 are free one per person
Norm,
Please send me one, too. Thank you for your graciously provided service.
We few, we happy few, here on the P-64 Board must hang together...
-- T-rat
TRIGGER RETURN SPRING
Posted: March 29th, 2006, 6:18 pm
by normsutton
T-RAT
It will be on it's way tomarrow, please leave feedback when you get it in
NORM
TRIGGER RETURN SPRING
Posted: March 29th, 2006, 8:31 pm
by warthog
I'd like two for my two altered pistol. How much are they?
TRIGGER RETURN SPRING
Posted: March 30th, 2006, 4:35 am
by normsutton
WARTHOG
They are free ( for one) to replace broken springs they won't make DA trigger pull any less
need address to send to
you will be # 4
or I can send you 2 and then you can send me what ever the 2nd is worth to you can't make a better deal than that
remember these are hand bent springs
and you will have to trim tales on springs
NORM
TRIGGER RETURN SPRING
Posted: April 1st, 2006, 7:16 pm
by rehdeer
Is that what could be wrong with my pistol? Was shooting fine and I took it apart. When I reassembled the trigger was not working. I didn't notice any sping missing. There is a metal guide from the hammer to the trigger. If I raise it up, the trigger will shoot. I have pictures I can email To you, if you think you can help.
Thanks
Mike
TRIGGER RETURN SPRING
Posted: April 1st, 2006, 9:38 pm
by jbailey
Unless you took it ALL the way apart, the spring is probably still in there, just not positioned correctly. It lifts the trigger/transfer bar (and the disconnector) when the slide is in battery, to allow the trigger pull to trip the sear. It takes some patience and perhaps dental tools to position the spring correctly when you put it all back together. Hope this helps.
TRIGGER RETURN SPRING
Posted: April 3rd, 2006, 11:49 pm
by warthog
One is fine. I need to read.
I just PMed you my address...
TRIGGER RETURN SPRING
Posted: April 4th, 2006, 4:27 am
by normsutton
WARTHOG
It will go out to day 4 AP 06
NORM