The Unofficial P64 Resource Forum

Uncle Mikes. $6.99

http://www.gunboards.com/forums/uploade ... 01867a.JPG

Is that the Hogue #18000?

Not a bad deal at all!

To post the actual picture instead of a link, click the little picture icon in the "Add Tags" area of the Post Message menu. It will add this: Put your link between the 2 tags and you've got yourself a posted picture like this:

Cruiser, these are actually Butler Creek grips for $6.99 that look like the med. size in my Midsouth Shooters supply catalog. The small size says small and med. size autos, and has no finger slots. Hogue has similar for $5.49.

I copied the picture from the Gunboard Mak site, and the poster said they were Uncle Mike's. Maybe Uncle Mike's makes Butler Creek stuff.

Think I'd call Butler Creek Customer Service at 406-388-1356 to verify that the medium shown on this picture isn't too big. Bottom of the grip on the picture looks loose. Asking what fits the PPK should work.

Midsouth has great prices on most stuff. Phone is 800-272-3000.
Hope this helps.

Dick,
Thanks for the picture lesson. I'm an old dog with not much computer experience, but am trying.
Stan

I went shoping today, took the P-64 with me. Found a slip on grip made by Pachmayr, Slip-On Grip Medium w/finger groovesthe size is model #3. Good fit and just what I needed. I did need to trim a little off the tip of the heel. Found it at a local gun shop. About $9.00. Link is for picture ref.
http://store.tradingpostsupply.com/yhst ... 20175.html

Had these grips where I work. To give you all an idea as to what they may look like.

pachmayr slip-on #4

uncle mike slip-on

houge slip-on

i GOT THE PACHMAYR SL[P ON PISTOL GRIP #4 (PART NBR:05110) works great, I had to really pull and tug to get it on, but its really nice and gives my P64 a real good feel.... better than thjose flat black plastic oem.

i GOT THE PACHMAYR SL[P ON PISTOL GRIP #4 (PART NBR:05110) works great, I had to really pull and tug to get it on, but its really nice and gives my P64 a real good feel.... better than thjose flat black plastic oem.

I like my Pachmayer but I got this one: previous post.

This is a three finger grooves, I love it. Found a slip on grip made by Pachmayr, Slip-On Grip Medium w/finger grooves the size is model #3. Good fit and just what I needed. I did need to trim a little off the tip of the heel. Found it at a local gun shop. About $9.00. Link is for picture ref.
http://store.tradingpostsupply.com/yhst ... 20175.html