Page 1 of 1
1968 versus 1973
Posted: March 17th, 2008, 5:44 pm
by rmeron
Other than the round hammer of the 68,are there any other differences between the 68 and the 73?
1968 versus 1973
Posted: March 17th, 2008, 5:51 pm
by normsutton
rmeron
round hammers have a longer firing pin than the triangle hammered guns
NORM
1968 versus 1973
Posted: March 17th, 2008, 6:23 pm
by rmeron
Thanks Norm.
1968 versus 1973
Posted: March 17th, 2008, 6:38 pm
by torpeau
rmeron
round hammers have a longer firing pin than the triangle hammered guns
Norm, what about the DA trigger pulls? My one round hammer's is much worse than on my others?
1968 versus 1973
Posted: March 17th, 2008, 6:42 pm
by normsutton
torpeau
have you done a hammer spring change
NORM
1968 versus 1973
Posted: March 17th, 2008, 9:11 pm
by torpeau
torpeau
have you done a hammer spring change
No spring change, my experience is that the standard round hammer DA trigger pull is much heavier than the standard DA trigger pull of the triangular hammer versions.
1968 versus 1973
Posted: March 18th, 2008, 6:40 am
by normsutton
torpeau
torpeau
you might be right I don't know , in all 4 of mine I've change the springs in them as soon as I got them
it maybe to compensate for the heaver hammer in the triangular hammer versions to put a lighter spring in it with the shorter firing pin, your guess is as good as mine
NORM
NORM