Page 2 of 2
PA-63 SPRING IN P-64
Posted: December 11th, 2006, 1:17 am
by saands
Norm,
Is this a mod that you have already tested? How did it work for you? Do you have any way of verifying the strength of the spring that you end up with?
TIA,
Saands
PA-63 SPRING IN P-64
Posted: December 11th, 2006, 6:57 am
by normsutton
Saands
YES
GOOD
NO
PA-63 SPRING IN P-64
Posted: December 11th, 2006, 12:25 pm
by saands
Great! I just ordered a pair from Wolff and will measure them ... this design is right on the edge of what is possible so if you have found a winner, I'm all for using them. Too bad Wolff doesn't offer bulk prices on the recoil springs like they do on the mainsprings.
Thanks for the tip,
Saands
PA-63 SPRING IN P-64
Posted: December 11th, 2006, 5:09 pm
by normsutton
saands
YOU HAVE PM
PA-63 SPRING IN P-64
Posted: December 30th, 2006, 3:13 pm
by saands
Norm ... you have e-mail
Saands
PA-63 SPRING IN P-64
Posted: December 31st, 2006, 9:16 am
by normsutton
GUYS
I have a print out on this spring change SAANDS did the wording and I did the pictures and I have 2 springs out to two members that are trying these springs in their guns .
I won't be making these springs to sell because of cost but if it's alright SAANDS I will email
instruction to you if you want one email me
NORMSUTTON@AOL.COM subject recoil springs
thank you SAANDS for all your help with this
I hope this will be a good fix for the recoil spring untill wolff starts making one
PA-63 SPRING IN P-64
Posted: January 15th, 2007, 2:33 pm
by normsutton
Haven't heard anything form the guys that i gave the springs to
but if anybody wants a copy of the plans email me and I'll send you a copy there free
you will have to order a 15# Pa-63 from Wolff