WELCOME THREAD AND MEM, INFO
Re: WELCOME THREAD AND MEM, INFO
Just signed up, but I’ve had a P64 for a few months now. I like it. It came with Marschal grips and looks to have had the spring upgrades. Very accurate, even out to 15 meters. Surprising little gun. Very clean, I holster wear. When I bought it, the mag that came with it had an issue with the spring collapsing weird. One of the coils was hung up inside. I was able to fix that in a few minutes. Probably was why the seller sold it…. Mag looked to be bad.
I just bought 2 mags and an original holster from Numeric. All of them seem to be new original. The mags are identical to the original, they were tight until I loosened the grip screw. The holster even has that new leather smell. Can’t wait to be at the range with 3 mags, so it doesn’t take all day.
Also bought a very used East German mag for my Bulgarian Makarov. It’s the one with the bulge, so it’s the main mag now. I’ll use the other without bulge as the 2nd mag, since it’s a faster swap that way. This mag was ugly and might get blued again once I pick up a kit.
Sent from my iPad using Tapatalk
I just bought 2 mags and an original holster from Numeric. All of them seem to be new original. The mags are identical to the original, they were tight until I loosened the grip screw. The holster even has that new leather smell. Can’t wait to be at the range with 3 mags, so it doesn’t take all day.
Also bought a very used East German mag for my Bulgarian Makarov. It’s the one with the bulge, so it’s the main mag now. I’ll use the other without bulge as the 2nd mag, since it’s a faster swap that way. This mag was ugly and might get blued again once I pick up a kit.
Sent from my iPad using Tapatalk
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: WELCOME THREAD AND MEM, INFO
welcome , there are a lot after market mags out there , and non of them are as good as the original mags , keep shooting tried to sell use a bunch , there weren't any good ether , their mags the medal is to thin on them , they look look like original mags but they aren't, so be Leary on buying mags
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/gadsden.jpg)
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/50star2.gif)
N.R.A. LIFE MEMBER 1976
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/gadsden.jpg)
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/50star2.gif)
-
- Veteran member
- Posts: 650
- Joined: November 19th, 2006, 8:28 pm
- Location: michigan, down the river
Re: WELCOME THREAD AND MEM, INFO
Welcome Marty, let us know how she shoots!!
Re: WELCOME THREAD AND MEM, INFO
Just joined up, can't create a new post yet to show my progress re-activating a pair of P-64's so figured I'd see if the reply feature works. Sent DFunk a message though so I figure it'll get fixed soon enough.
I'm thinking a .32ACP conversion, a .380 conversion, one matte hard chrome and maybe a nickel boron. I already have a P83, so rebuilding them into 9x18 Mak isn't a huge priority, and even with the big hole in the barrel they feed and eject .380 just fine.
I'm thinking a .32ACP conversion, a .380 conversion, one matte hard chrome and maybe a nickel boron. I already have a P83, so rebuilding them into 9x18 Mak isn't a huge priority, and even with the big hole in the barrel they feed and eject .380 just fine.
Re: WELCOME THREAD AND MEM, INFO
Welcome Wolf.. Creating new posts has been broken for some months now. Unknown if it will get fixed.
Laugh Hard and Often.
Gary
Gary
Re: WELCOME THREAD AND MEM, INFO
Anybody know what happened to site admin dfunk? This site is broken or has been hacked and new posts can not be created.
He hasn't been on since 2020.
He hasn't been on since 2020.
Laugh Hard and Often.
Gary
Gary
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: WELCOME THREAD AND MEM, INFO
been trying to get a hold of DF ( Chris ) for a while now never had his phone number , so i don't whats going on
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/gadsden.jpg)
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/50star2.gif)
N.R.A. LIFE MEMBER 1976
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/gadsden.jpg)
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/50star2.gif)
Re: WELCOME THREAD AND MEM, INFO
Tthat is a shame looks like this site is gonna be in limbo.
Laugh Hard and Often.
Gary
Gary
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: WELCOME THREAD AND MEM, INFO
yes i don't know if Hayden (Papabear ) was the other monitor is still alive too been 2 years since i talk to him , he was older than me and wasn't doing to well the last time i talk to him . i have emailed both , and i have limited access to the site i can only do certain things , DF (Chris ) was the owner of the site , there is still a lot of good info on his site , that can be accessed , so as long as i'm alive i do what ever i can to keep it up , but like i said i have limited access to the site , sorry
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/gadsden.jpg)
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/50star2.gif)
N.R.A. LIFE MEMBER 1976
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/gadsden.jpg)
![Image](http://i56.photobucket.com/albums/g198/NORMSUTTON/FLAGS/50star2.gif)
Re: WELCOME THREAD AND MEM, INFO
I would suggest any one with problems or new info attach them in this post?
Laugh Hard and Often.
Gary
Gary
Re: WELCOME THREAD AND MEM, INFO
Does anyone have an extra Polish Iron grip that they would like to sell? My email address is collins@alescodata.com Thanks in advance.
-
- Posts: 1
- Joined: December 20th, 2022, 7:20 am
Re: WELCOME THREAD AND MEM, INFO
Okay, there you are, ready to buy a self defence product and now that you're looking at the various makes models and well, you're stumped on which one to buy.