Lead bullets in polygonal barrels?
-
- Forum supporter
- Posts: 1221
- Joined: February 5th, 2007, 8:52 pm
- Location: Portland Oregon
Lead bullets in polygonal barrels?
You fellows have heard me speak of Bear Creek Molly coated Lead Bullets in the past and how impressed I am by them. Well, add another plus for this product. This afternoon I fired one hundrad 95 gr. Bear Creek 9x18 bullets through my CZ 82's polygonal barrel and cleaned the barrel with one pass of a 9mm boar snake with out a hint of lead build up in the barrel. This speakes volumes for this product and I hope you will learn to appreciate them as much as I do.
G.R.
G.R.
Re: Lead bullets in polygonal barrels?
wow, good to know. Thanks for the information.
wyo-man
wyo-man
-
- Member
- Posts: 76
- Joined: July 29th, 2010, 12:13 pm
- Location: Lawrence MI
- Contact:
Re: Lead bullets in polygonal barrels?
Be good if they were still in business... I tried to order from them recently and was told they are having financial difficulties...
Anything I post may be my opinion and not the law... you are responsible to do your own verification.
Blackstone (1753-1765) maintains that "the law holds that it is better that ten guilty persons escape than that one innocent suffer."
Blackstone (1753-1765) maintains that "the law holds that it is better that ten guilty persons escape than that one innocent suffer."
-
- Forum supporter
- Posts: 1221
- Joined: February 5th, 2007, 8:52 pm
- Location: Portland Oregon
Re: Lead bullets in polygonal barrels?
I'm not sure about that, I buy from my local gun smith and he always has them in stock, my guess is that if he is having problems it is keeping up with orders. You might want to search the internet for some one else who carrys them. There are also several other manufacturers who make them and that may be another option. MIDWAYUSA has moly powder and a plating system that is rather inexpensive to purchase. The only extra that you need is a dedicated tumbler. The thing that I like about Bear Creeks product is their application, guranteed not to come off at magnum speeds and I can vouch for that. I'm loading .357 moly coated led bullets so hot it down right hurts to shoot them out of my New model Ruger Blackhawk and the bullets are intact when they hit the paper targets.
G.R.
G.R.
- papabear
- Global moderator
- Posts: 2080
- Joined: January 22nd, 2006, 1:16 am
- Location: Madisonville, Kentucky
Re: Lead bullets in polygonal barrels?
Its my understand that Bear Creek is closed also, their domain name is up for sale or it was, the info I got said they closed their doors back in late 2007, thats hear say so it might not be true.
-
- Forum supporter
- Posts: 1221
- Joined: February 5th, 2007, 8:52 pm
- Location: Portland Oregon
Re: Lead bullets in polygonal barrels?
"Precision Bullets at Affordable Prices" is his moto.
BEAR CREEK SUPPLY
P.O. Box 177
Waterford , CA 95386
He is still in business, my guess is that he has more business than he can handle and is just selling to shops and smiths.
G.R.
BEAR CREEK SUPPLY
P.O. Box 177
Waterford , CA 95386
He is still in business, my guess is that he has more business than he can handle and is just selling to shops and smiths.
G.R.
- papabear
- Global moderator
- Posts: 2080
- Joined: January 22nd, 2006, 1:16 am
- Location: Madisonville, Kentucky
Re: Lead bullets in polygonal barrels?
Good to hear that gunnyrabbit.
papa
papa
Re: Lead bullets in polygonal barrels?
I have had really good results lately with Missouri Bullets 93gr RNL bullets in my CZ82 with 3gr of Titegroup.
I'm going to drop it down to 2.5gr and see how it does. Silver Bear 95gr HP & FMJ as well as higher power
reloads with 231, Unique, Bullseye, and others sprayed lead all over the place with my CZ82. My CZ82
just doesn't like hot rounds at all.
Robert
I'm going to drop it down to 2.5gr and see how it does. Silver Bear 95gr HP & FMJ as well as higher power
reloads with 231, Unique, Bullseye, and others sprayed lead all over the place with my CZ82. My CZ82
just doesn't like hot rounds at all.
Robert
- papabear
- Global moderator
- Posts: 2080
- Joined: January 22nd, 2006, 1:16 am
- Location: Madisonville, Kentucky
Re: Lead bullets in polygonal barrels?
smbob,
I don't reload yet for the 9x18 due to a huge cache of factory 9x18, but I also buy all my lead cast bullets 38/357 thur 44 mag from Missouri Bullet Co, I'm very satisfied with them.
I don't reload yet for the 9x18 due to a huge cache of factory 9x18, but I also buy all my lead cast bullets 38/357 thur 44 mag from Missouri Bullet Co, I'm very satisfied with them.
Re: Lead bullets in polygonal barrels?
PB,
I use Missouri Bullets for my 9X18, 41Mag, & 45ACP reloading. Love 'em! Fast excellent service along
with great prices. They perform quite well too!
Robert
I use Missouri Bullets for my 9X18, 41Mag, & 45ACP reloading. Love 'em! Fast excellent service along
with great prices. They perform quite well too!
Robert
Re: Lead bullets in polygonal barrels?
I might be interested in using some lead bullets but I am really unsure how the lead will affect the polygonal rifling of a cz-82.
I know you say these bullets won't have an affect but what I am asking is.....what is normally said to happen with regular lead bullets in polygonal rifling?
I know you say these bullets won't have an affect but what I am asking is.....what is normally said to happen with regular lead bullets in polygonal rifling?
-
- Forum supporter
- Posts: 1221
- Joined: February 5th, 2007, 8:52 pm
- Location: Portland Oregon
Re: Lead bullets in polygonal barrels?
Standard rhetoric is that lead bullets can not be used in polygonal barrels with out leading the barrel. I first tried Buffalobore hard cast bullets without any leading "per the company's advertisments" and they work as advertised. Thought I would try Bear Creek Moly coated bullets since I had been having so much luck with my other pistoles and no leading. I have used lightly copper coated lead bullets with the same results, some so lightly coated that the lead is visable through copper coating. All have been fired through my CZ82 and all have worked just fine.
I can report that several highly revered manufactures hard cast lead bullets do lead the barrel of my CZ82, without mentioning names I can report that it seems to depend on the alloy formulation, the softer the bullet the more leading.
All bullets have been loaded to under 1000 feet per second (FPS) with good results. I'm working on a Winchester 231 reload with the Bear Creek bullets and an Alliant reload with the same bullets. My main interest is muzzle velocity and FPS at ten feet. Imperical evidence is that Moly coated bullets are faster than copper jacketed bullets with similar loads. I believe the assumption's to be true and I also believe that similar muzzel velocity's can be aquired with less powder consumption. Combine that with less felt recoil which I can attest to, it seems to me to be, in my opinion; a win win situation. Regardless of the outcome I will report the results, posative or negative.
G.R.
I can report that several highly revered manufactures hard cast lead bullets do lead the barrel of my CZ82, without mentioning names I can report that it seems to depend on the alloy formulation, the softer the bullet the more leading.
All bullets have been loaded to under 1000 feet per second (FPS) with good results. I'm working on a Winchester 231 reload with the Bear Creek bullets and an Alliant reload with the same bullets. My main interest is muzzle velocity and FPS at ten feet. Imperical evidence is that Moly coated bullets are faster than copper jacketed bullets with similar loads. I believe the assumption's to be true and I also believe that similar muzzel velocity's can be aquired with less powder consumption. Combine that with less felt recoil which I can attest to, it seems to me to be, in my opinion; a win win situation. Regardless of the outcome I will report the results, posative or negative.
G.R.