p-64 firing pin
p-64 firing pin
7point62fmj,
Man that is super. I would like 2 if possible. Thanks for doing all the leg work on this. Sgt P.
Man that is super. I would like 2 if possible. Thanks for doing all the leg work on this. Sgt P.
-
- Veteran member
- Posts: 650
- Joined: November 19th, 2006, 8:28 pm
- Location: michigan, down the river
p-64 firing pin
Good work on getting this done!! It reminds me of the feeling when Wolff said they'd be making our beloved recoil and hammer springs, still waiting on mag springs but I haven't heard of any wearing out yet any how.
p-64 firing pin
Well done! If they want to sell them off of the site, tell them to shoot me an email.
-
- Veteran member
- Posts: 650
- Joined: November 19th, 2006, 8:28 pm
- Location: michigan, down the river
Re: p-64 firing pin
Just a bump to the top
Re: p-64 firing pin
I just sent an e-mail to Harrington Products. Does anyone know if they have started a back order list?
Re: p-64 firing pin
Any news on firing pins?
Re: p-64 firing pin
Any updates on this subject? Anybody? Hello? ...
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: p-64 firing pin
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Re: p-64 firing pin
Hey Norm ,haven't been on here in a while,my apologies to everyone !I tried emailing Harrington Products Inc. some time ago, to ask about any updates, and they never replied??? Hope this doesn't mean this endeavor has been 86ed,and their customer service is bad??
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: p-64 firing pin
protector
it probably has , these firing pins for these guns made like other firing pins , same with the safeties , there are to few that brake ,
NORM
it probably has , these firing pins for these guns made like other firing pins , same with the safeties , there are to few that brake ,
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Re: p-64 firing pin
I just got off the phone with Joe Bartelt of http://www.Gunpartswarehouse.com he is interested in making these if someone would possibly have a sample pin to send him for observation.We also need to have a Rockwell hardness idea of what we would want these made to specs.He is willing to look at it and possibly make a initial run of about 25 pins to see how they would sell. If anybody is willing to send him a pin,or knows all the correct specs(hint,hint,Norm). I think we may have found a manufacturer...I gave him the forum URL to look here...
-
- Global moderator
- Posts: 3575
- Joined: February 26th, 2006, 6:59 am
- Location: LAKELAND FL.
Re: p-64 firing pin
protector
better send him a round hammer firing pin they are longer , and I not sending one of mine, I think the safeties are more important than a firing pin, the firing pins don't brake on the P-64 as long as you don't have a pierced primer , shoot quality ammo in the gun and no wolf ammo . and it will give you years of service , by that time there will parts out there
NORM
better send him a round hammer firing pin they are longer , and I not sending one of mine, I think the safeties are more important than a firing pin, the firing pins don't brake on the P-64 as long as you don't have a pierced primer , shoot quality ammo in the gun and no wolf ammo . and it will give you years of service , by that time there will parts out there
NORM
NORMSUTTON@AOL.COM
N.R.A. LIFE MEMBER 1976
N.R.A. LIFE MEMBER 1976
Re: p-64 firing pin
Just meant possibly you would know the dimensions of the pins,didn't mean for you to send you pin in Norm,sorry for the confusion.I think I'll just sit tight since my hasn't been a problem since I got it.Just trying to help some of the ones that need it out.
Re: p-64 firing pin
Would he send it back and how long would he need it?
Re: p-64 firing pin
Please contact him if you are interested( name and link above),thanks!brock123 wrote:Would he send it back and how long would he need it?