Loose disconnector?

Mods and Fixes by P-64 users...
Post Reply
Coco86
Junior member
Posts: 10
Joined: October 25th, 2011, 3:34 pm

Loose disconnector?

Post by Coco86 »

I was noticing when i disassembled my p64 that the disconnector was kind of loose. When i pull the trigger a little bit and release it, it goes up and sometimes down. Is this a problem i should be worried about and should i get a new disconnector?
User avatar
juniustaylor
Elite member
Elite member
Posts: 1408
Joined: February 9th, 2010, 10:56 pm
Location: KV, MO
Contact:

Re: Loose disconnector?

Post by juniustaylor »

To the best of my knowledge mine does that as well. Seems to work normal. As long as the trigger won't cause the hammer to fall with the slide out of battery and that the hammer falls when the safety is moved to safe (ie, all the normal functions of the disconnector) then I probably wouldn't mess with it. They are relatively wiggly in there. ;)
US Air Force Veteran - OEF/OIF
Coco86
Junior member
Posts: 10
Joined: October 25th, 2011, 3:34 pm

Re: Loose disconnector?

Post by Coco86 »

In that case i wont order a new disconnector and mess with it.Thanks
Post Reply