The Unofficial P64 Resource Forum

... and polish everything that moved. After wolf springs (20lb recoil and 18 lb hammer), some lube ... action. If I cock the hammer (or rack the slide) the trigger can be pulled once and sometimes ... sure how to order one. A search revealed that NORM SUTTON sells these springs. Can anyone give ...

Fred

try the original hammer spring , also what kind of ammo , check your firing pin , dose it push out all the way with the slide off

and did you clean the gun before you ever took it to the range,
NORM

as much as I'd like to sell him a spring , don't think that's the problem, these surplus ... battery so it fires, or maybe he is riding the slide but i don't think so http://www.p64resource.com/forum/viewtopic.php?f=3&t=2593 NORM very good with cast boolits( as we call them) it is in ...

as much as I'd like to sell him a spring , don't think that's the problem, these surplus ... battery so it fires, or maybe he is riding the slide but i don't think so http://www.p64resource.com/forum/viewtopic.php?f=3&t=2593 NORM

It happened with my CZ82 due to a weak slide stop spring. During recoil the slide stop would jiggle upwards and lock back prematurely. Get a new one from Norm and you should be set.

... screwdriver, from the bottom side of the slide. Use it to retain the spring and detent in it's hole. As Norm said, push the safety into it's position until you bump against ...

Hey Norm, just finished cleaning and lubing my newest p-64,its a 1977. I've got another question on assmbly of the slide, I used your hemostat trick it worked great. Now ... have any cool tricks for containing the safety detent spring and pin during assmbly. Its a pain in the butt. ...

I removed slide and grips, then removed slide stop bar to examine trigger return spring. Did not remove trigger but spring looked intact like Norm's photo. Everything appeared to be pretty clean but I flushed everything ...

... I'm having probs with my CZ-82 locking the slide back when there's still one or two or three ... but Silver Bear FMJ. I replaced the slide stop spring with one from Norm when I first got the pistol about a year ago. He sent ...

... you insert an empty magazine and pull back the slide it should stay open, remove the magazine, ... doesn't work something is bound or you have a spring issue. Remove any magazine. Pull the trigger ... stop. If this is an issue you can buy one from Norm just search the board. If not: Make sure ...

eagle71


sear spring for a CZ-82 should be the same spring as the CZ-83 the only spring they don't make any more is the slide stop spring and I make that

NORM

... I got a chance to grind the Wolff recoil spring on a belt sander at work, the ends are now ... and the previous symptoms seem to have gone. Norm, No the topic is not originally about the safety, ... 5, To unload a P-64, it would have you let the slide forward while on safe. This is the type of ...

... post was about having problems with the spring and removing the slide. Weasel did mention this... One thing that I did notice; ... etc. that I have offered here. However, thanks Norm for the advice on the lubrication procedures.

... it is my primary CCW. Even with a 20 lb Recoil spring the recoil is substantial indeed and takes some getting used too. Slide bite is equal to a Walthers PPK so you will need ... all the members that were so kind to help me out. Norm, that trick with the heat for bluing made this ...

... a free floating firing pin it has a firing pin spring in it,to keep it away from the primer until ... in the chamber , I was instructed to rack the slide as I draw my weapon an it is second nature ... when I drew my gun, an I'm to old to change NORM