The Unofficial P64 Resource Forum

... a few months but other than 1 trigger return spring, I've not needed any parts. (And I believe ... I'd get a trigger return spring or 2 from NORM SUTTON (forum member) for $6 shipped and he takes PayPal. Same for the slide stop lever spring - same price same place. Maybe ...

make sure small end of recoil spring goes on barrel first .


NORM

Robert, I replaced the slide stop lever completely. That seemed to do the trick for me. That, and the magazine springs. Is it possible you have a mag with a really weak ... clean that face of all gunk that's on it, too. Like Norm Sutton says: 99% of the problems with these pistols ...

... you a good description of the function of the slide lock spring and its operation and where to get one. I think I ... may need is the TRIGGER spring. Also available from Norm Sutton, also for $6 delivered and also obtained from ...

There's a spring that pops the slide stop open when your mag is empty. Perhaps this little spring ... or is missing. The good news is that forum member Norm Sutton makes a replacement spring for $6 delivered! And he ...

... bar snug in the upper channel is the trigger spring. You need to lift the end of the trigger ... as the problem but I think you mean the "slide stop". The flat part that is spring-loaded ... is available from forum member Norm Sutton as well as a trigger spring) so that ...

... week plus) but by fact that there is a trigger spring replacement (which I already needed without ... this part is particularly problematic. Member Norm Sutton makes and sells a trigger spring for $6 shipped (!!!) AND a slide-stop spring for $6 shipped, too. Looked like good ...

... out upon receiving it, I noticed the trigger spring was broken. I do not recall if I actually ... sitting up until yesterday (Thursday 4/9) when Norm's replacement spring arrived. The original ... and nothing will budge. If I re-install the slide the safety/de-cocker will drop the hammer ...

... is just no other way. I ordered 2 more of Norm's trigger springs and one slide-stop spring for spares. I also ordered 2 detent pieces and ...

... scroll down and you should find the slide spring you need for $6.00 shipped. He also has trigger springs ... for this forum! Just a quick question: The fact that Norm has the trigger spring available se r4eadily, does ...

... the interior and saw a slight imperfection on the inside of the slide, on the same block of metal that the firing pin and spring ride inside. It was on the same side as the part of the safety that engages the disconnector. ...

Here's the problem: When slide is cycled and round chambered, pistol works fine. ... is pulled back manually, trigger works fine. Will Norm's trigger spring fix this? Can just the trigger & spring be dropped ...

... Look at page 58, if your slide stop and spring don't look like that, follow the steps on pages 54-59. ... right you may have a weak slide stop spring, as noted Norm sells replacements. You may also have a worn/weak recoil ...

NORM is right. You need to be sure that the recoil spring is properly oriented, small end goes on first, otherwise it won't go back together. I've made the mistake ...

I have always found its a lot easier to have the recoil spring on the gun to put the slide back on ,, just make sure the small end of the spring goes over the barrel first

NORM
Sent from norms computer norm doesn't have a smart phone (LMAO)