You're welcome.
Before ordering, make sure it hasn't slipped off. However, it wouldn't be a bad idea to get a new TB and TS.
Search found 198 matches
- November 21st, 2017, 12:06 pm
- Forum: General P-64 Discussion
- Topic: FEG SMC 380 JUST STOPPED FIRING!!
- Replies: 38
- Views: 32186
- November 20th, 2017, 10:09 pm
- Forum: General P-64 Discussion
- Topic: FEG SMC 380 JUST STOPPED FIRING!!
- Replies: 38
- Views: 32186
Re: FEG SMC 380 JUST STOPPED FIRING!!
Another thing. Cock the hammer and look at the bottom of the TB and see if the trigger spring is attached on the bottom of it. It's the silver piece that you see in this picture. When you cock the hammer the TB rises
.
.
- November 20th, 2017, 9:36 pm
- Forum: General P-64 Discussion
- Topic: FEG SMC 380 JUST STOPPED FIRING!!
- Replies: 38
- Views: 32186
Re: FEG SMC 380 JUST STOPPED FIRING!!
In the first picture, is the hammer cocked? If not, the tab on the cocking lever/sear should be parallel to the frame and resting on the bottom spur of the hammer. You have to look inside the slot on the in front of the hammer pin. Also make sure that the front of the TB is fully inserted into the t...
- November 20th, 2017, 7:57 pm
- Forum: General P-64 Discussion
- Topic: FEG SMC 380 JUST STOPPED FIRING!!
- Replies: 38
- Views: 32186
Re: FEG SMC 380 JUST STOPPED FIRING!!
Take a picture of yours so I can see what you have.
- November 19th, 2017, 11:08 pm
- Forum: Other 9x18's
- Topic: PA-63 MANUAL AND HUNGARIAN WEAPONS
- Replies: 7
- Views: 17991
Re: PA-63 MANUAL AND HUNGARIAN WEAPONS
Nice work. I recently bought the .32 ACP version and I like it quite a bit. Funny thing is the frame on it is anodized green. :shock: Had a PA-63 before but foolishly sold it to buy, of all things my P-64. Your APB is from Mars. :mrgreen: I could have sold you one of my PA-63, NOT! :mrgreen: :evilg...
- November 19th, 2017, 11:05 pm
- Forum: General P-64 Discussion
- Topic: FEG SMC 380 JUST STOPPED FIRING!!
- Replies: 38
- Views: 32186
Re: FEG SMC 380 JUST STOPPED FIRING!!
I have the same gun. Take the slide off then the grips. On the right side you will see the trigger bar and cocking lever. It should look like the picture does. Look at how the hammer engages the sear. It should be in the groove of the sear/cocking lever. Your problem can also be a broken/slipped tri...
- November 9th, 2017, 8:28 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: Please Help -- 1 oz SA trigger pull
- Replies: 33
- Views: 26768
Re: Please Help -- 1 oz SA trigger pull
I think there are some that the SA is fine and others that are light. My friend Ketchman told me that Radom had three different hammers that were modified and thinks that there was a possibility that the sear angles were also modified making the SA trigger lighter each time. We got the latter, so th...
- November 9th, 2017, 7:35 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: Please Help -- 1 oz SA trigger pull
- Replies: 33
- Views: 26768
Re: Please Help -- 1 oz SA trigger pull
This is why I traded mine for a blued FEG PA63. The SA was way too light to safely carry it. I also tried the different springs to no avail. You can use it for range shooting but not as an EDC. My FEG SMC-918 (same as the FEG R-61 but blued) and Radom P83 have safer SA triggers than my P64 did.
- November 5th, 2017, 10:45 pm
- Forum: Other firearms...
- Topic: Astra A75
- Replies: 11
- Views: 19247
Re: Astra A75
And no, OG17, I will NOT send it to you for "testing". Lol. :mrgreen: In that case I won't send you my BHP and PCR, so there. :P :mrgreen: BTW, nice looking grips. I have a couple that Ketch made for my 1911s: The ones on the Ruger are Spalted Maple and the ones on the RIA are Padauk. He ...
- October 8th, 2017, 5:56 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: Slide stuck while reassembling.
- Replies: 3
- Views: 4364
Re: Slide stuck while reassembling.
Ditto on what Curly said. Here's a thread that addresses your issue.
viewtopic.php?f=1&t=6618&p=57301&hilit=OG17#p57301
viewtopic.php?f=1&t=6618&p=57301&hilit=OG17#p57301
- September 15th, 2017, 4:24 pm
- Forum: General P-64 Discussion
- Topic: Thoughts and hopes for those in the way of Irma
- Replies: 25
- Views: 19646
Re: Thoughts and hopes for those in the way of Irma
Glad you made it ok Norm. Andrew was a bad mother for those in Homestead. I'm in west Kendall so I think we got something like the 120+ mph winds when Andrew blew by.
- September 14th, 2017, 2:58 pm
- Forum: General P-64 Discussion
- Topic: Thoughts and hopes for those in the way of Irma
- Replies: 25
- Views: 19646
Re: Thoughts and hopes for those in the way of Irma
That's good to know Curly. On the return trip I went through Orlando and didn't see much structural damages but id notice some water on the roads. Port St. Lucie would have been affected by the storm surge and flooding. Hope all turns out well.
- September 13th, 2017, 2:58 pm
- Forum: General P-64 Discussion
- Topic: Thoughts and hopes for those in the way of Irma
- Replies: 25
- Views: 19646
Re: Thoughts and hopes for those in the way of Irma
Thanks Curly. Yeah, we dodge a bad mother and were fortunate by the grace of God.
- September 12th, 2017, 9:13 pm
- Forum: General P-64 Discussion
- Topic: Thoughts and hopes for those in the way of Irma
- Replies: 25
- Views: 19646
Re: Thoughts and hopes for those in the way of Irma
I'll will look into it for the Irma cause because I can get more local info than Texas info. But I just a thing on TV called Hand in Hand (?) That's collecting for both. Here's some info on the Hand In Hand benefit https://www.cbsnews.com/news/hand-in-hand-benefit-concert-hurricane-harvey-telethon-l...
- September 12th, 2017, 8:36 pm
- Forum: General P-64 Discussion
- Topic: Thoughts and hopes for those in the way of Irma
- Replies: 25
- Views: 19646
Re: Thoughts and hopes for those in the way of Irma
Much thanks to Ketch & Curly for the concern. It was an ordeal but at least we are safe. House just lost the wooden fence but no other structural damage. Many downed trees in the neighborhood and around town. Still many without power or water. The Keys and the west coast cities of Marco Island a...