The Unofficial P64 Resource Forum

Norm's the man!

I know this is a really old post, but I just wanted to let everyone know that Norm's Slide stop spring fixed the problem! Now I haven't had ONE malfunction. Thanks Norm for the fast and generous service!

Thanks to Norm for the slide stop spring. My slide was locking open intermittently while I still had rounds ...

... it apart as far as I can, which is basically slide and grips off. What I can see is that the ... of course), and changing the recoil and hammer springs have had no effect in making it better or ... all this, I bought a P64 trigger spring from Norm, hoping to reshape it correctly. Unfortunately, ...

I assume you mean firing pin spring? My advice would be to go here http://p64resource.com/forum/viewtopic.php?f=7&t=1536 ... if you have a pair of locking forceps (thanks Norm) to hold the pin fully forward (that is, the firing ... out and unlock the firing pin from the forceps. Slide it all out, ...

Hi Gents-thanks for the replies. Norm, I checked, and it looks like the trigger return spring is in place. I had trouble getting the slide stop bar off, but I found with the aid of a flashlight, I could ...

... First, I've read that changing out the main spring helps alot with the double action trigger ... work. Third, I've read somewhere that a Mr. Norm Sutton has replacement trigger and slide stop springs. How much are they and how do I contact ...

... rounds (i have put upwards of 500) Trigger spring broken (picked up a few from Norm (perfect fit)) replaced slide stop spring at same time all else is well with regular cleaning ...

I actually meant the trigger spring was broken not firing pin spring. I ordered one from Norm along with a slide stop spring and everything works great on the gun. I also changed ...

Ok, thanks Norm! Ill be ordering a few of these springs. I hope this is the only problem with this pistol. I will update.

slide stop spring's go here

http://www.p64resource.com/goods.php

NORM

NORM IS RIGHT! And he was right in the first place! The problem is the replacement recoil spring. I should have known from the fact that with the heavier recoil spring, removing and replacing the slide is a bear. In fact, if I were even a little whit weaker, ...

go get a 1911 45-035 Plunger Spring $1.00
45-036 Plunger (Slide Stop) $1.00

http://www.amherst-depot.com/gunparts.45.htm

this will work for the safety

NORM

I know nothing of a Wolff trigger spring. There will be a long coiled spring that came ... because it gets the firing pin recessed into the slide during ejection faster. This prevents the firing ... Be sure to catch the detent and its spring. Norm suggests using a large clear bag so it'll be ...

... for the SKS, it says this: 7. Replace recoil spring assembly: a. Insert recoil spring assembly, ... Pull receiver cover pin fully to the right. C. Slide receiver cover into place from the rear. d. ... not going to question those that own an SKS. Norm and papabear don't seem to have any problems ...