Here is a like to lots of info on 9x19 ammo.
http://forums.gunboards.com/showthread. ... -Data-Post
Search found 72 matches
- August 16th, 2010, 2:22 pm
- Forum: General P-64 Discussion
- Topic: New Member, New P-64--Ammo Advice
- Replies: 30
- Views: 20196
- August 13th, 2010, 1:53 pm
- Forum: General P-64 Discussion
- Topic: My 5 P64s from SOG
- Replies: 4
- Views: 4389
Re: My 5 P64s from SOG
Well what do the replacements look like and what year? I call and they told me they only had 1975s. Well I recieved a 1976 and 1977 both unissued. I know that there are at least two different styles of magazines. Does anyone know what year they started using the longer feed length? I have two of eac...
- August 2nd, 2010, 7:10 pm
- Forum: General P-64 Discussion
- Topic: Where to buy a P64.
- Replies: 27
- Views: 17920
Re: Where to buy a P64.
Is SOG out of them?
- July 25th, 2010, 8:31 am
- Forum: General P-64 Discussion
- Topic: 20# Recoil Spring Very Tight on Slide
- Replies: 3
- Views: 3039
Re: 20# Recoil Spring Very Tight on Slide
That fixed the problem. Surprized that wolf does not advise anyone about this.
- July 24th, 2010, 8:13 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: Gun won't fire in DA
- Replies: 22
- Views: 14358
Re: Gun won't fire in DA
LynnKCircle If you just installed one of the Wolf Recoil Springs you have to remove it and grind down the two ends so they are flat and look like your original recoil spring. Without doing this it is hard to get the slide on and off. It also raises the spring so that it binds or rubs on the slide. I...
- July 13th, 2010, 7:41 am
- Forum: General P-64 Discussion
- Topic: Polish P-35 9mm.
- Replies: 1
- Views: 2118
Re: Polish P-35 9mm.
Because it is C&R and WWII! If you are looking for a good BHP you can get a circa 1990 Argentine one for about 350.00.
- July 12th, 2010, 11:45 am
- Forum: General P-64 Discussion
- Topic: 20# Recoil Spring Very Tight on Slide
- Replies: 3
- Views: 3039
20# Recoil Spring Very Tight on Slide
I looked at those round ends and was saying to myself this may be a problem. At least now I can look forward to a problem getting the slide back off. Then a quick fix. Thanks.
- July 12th, 2010, 8:29 am
- Forum: General P-64 Discussion
- Topic: problems with Sellier & Bellot ammo
- Replies: 21
- Views: 15032
Re: problems with Sellier & Bellot ammo
If you have any still ammo left in that box it would be interesting to weigh them and see if there are any more light loads.
- July 12th, 2010, 8:04 am
- Forum: General P-64 Discussion
- Topic: 20# Recoil Spring Very Tight on Slide
- Replies: 3
- Views: 3039
20# Recoil Spring Very Tight on Slide
Got my spring kit from wolf and was surprised that the package was marked P64/Makarov Springs. Hammer spring was a little longer than the original but seems to work fine. I had a hard time getting the slide back on. It seems that the 20# spring is just a little thicker than the original one and fits...
- July 5th, 2010, 8:42 am
- Forum: General P-64 Discussion
- Topic: Does safety decock hammer.
- Replies: 1
- Views: 1886
Does safety decock hammer.
I noticed that some times when I engage the safety it will also decock the hammer. Sometimes it does not.
- July 5th, 2010, 8:36 am
- Forum: Other 9x18's
- Topic: Any of you all having a problem with 8 Rounds in the P.83
- Replies: 7
- Views: 6144
Re: Any of you all having a problem with 8 Rounds in the P.8
Have you cleaned the inside of the mag?
- July 4th, 2010, 12:20 pm
- Forum: General P-64 Discussion
- Topic: SOG has P64's in Stock
- Replies: 4
- Views: 3964
Re: SOG has P64's in Stock
Got mine this week 1971 with round hammer. One matching mag one non- Also ordered my spring kits.