Hey all,
I found the metric screw I needed. It was really hard to find one long enough, but I found one. I had to trim it down and paint it, but everything seems to be in order now. Thanks!
Search found 12 matches
- June 7th, 2010, 4:00 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: Marschall Grip Screw Problems
- Replies: 5
- Views: 4916
- June 4th, 2010, 7:53 pm
- Forum: Modifications, Fixes, and Repairs
- Topic: Marschall Grip Screw Problems
- Replies: 5
- Views: 4916
Marschall Grip Screw Problems
Hey all, I just bought a set of Marschal grips for my P64. They grips are beautiful, but they don't work with my grip screw. The grip screw is a few millimeters too short. The other end doesn't even reach the threaded area. I looked to see if a different screw was in the packaging but found nothing....
- February 8th, 2010, 3:02 pm
- Forum: General P-64 Discussion
- Topic: WELCOME THREAD AND MEM, INFO
- Replies: 718
- Views: 654558
WELCOME THREAD AND MEM, INFO
Hey all,
I bought my first P64 the other week. I'm looking forward to shooting and hopefully carrying this gun.
I go to school at UNC and am probably one of 5 people who understand gun ownership is prevalent among demographics other than domestic terrorists and criminals...
I bought my first P64 the other week. I'm looking forward to shooting and hopefully carrying this gun.
I go to school at UNC and am probably one of 5 people who understand gun ownership is prevalent among demographics other than domestic terrorists and criminals...
- February 8th, 2010, 2:16 pm
- Forum: Carry Gear, Holsters, etc.
- Topic: Ankle Holsters?
- Replies: 17
- Views: 35035
Ankle Holsters?
Hey all,
I was just wondering if anyone here uses an ankle rig for a P64. Specifically I was considering a wolverine ankle holster from the sportsmans guide. I figure this will tide me over until I can get a US Gunleather IWB hoslter. I figure it can't hurt to have multiple carry options either.
I was just wondering if anyone here uses an ankle rig for a P64. Specifically I was considering a wolverine ankle holster from the sportsmans guide. I figure this will tide me over until I can get a US Gunleather IWB hoslter. I figure it can't hurt to have multiple carry options either.
- February 8th, 2010, 1:42 pm
- Forum: General P-64 Discussion
- Topic: Where is everyone from?
- Replies: 245
- Views: 140147
Where is everyone from?
North Carolina here.
Go Heels!
(just not this season...)
Go Heels!
(just not this season...)
- February 7th, 2010, 8:20 pm
- Forum: General P-64 Discussion
- Topic: New guy, just bought a '67 P-64
- Replies: 13
- Views: 10285
New guy, just bought a '67 P-64
I just bought a P64 myself. I think it'll be a good shooter and I can't wait to try it out. You'll love the CZ82. I did have to trim down the insides of my grips because they would pinch the mag if I tightened the grips too tight. Apart from that mine has been very reliable, super accurate, and prob...
- February 6th, 2010, 5:57 pm
- Forum: General P-64 Discussion
- Topic: p-64 they have 13 left
- Replies: 26
- Views: 17733
p-64 they have 13 left
I grabbed one of these the other day. She's a 76' triangle hammer and in great shape. Haven't shot her yet but... Already replaced the recoil with a Wolf 20 lb spring (had to taper ends slightly) and an 18 lb hammer spring. Makes the DA much nicer! And polished the feed ramp. Should be a good CCW!
- February 6th, 2010, 4:07 pm
- Forum: General P-64 Discussion
- Topic: Reassembly Issue?
- Replies: 8
- Views: 6175
Reassembly Issue?
Hey all,
I lightly flattened the spring ends like I suppose you have to do for a 22 lb spring. Seems like it's working now!
The package definitely says 20 lb. Maybe they changed their spring design or I somehow go a 22lb?
Hope this helps anyone who may encounter this again.
I lightly flattened the spring ends like I suppose you have to do for a 22 lb spring. Seems like it's working now!
The package definitely says 20 lb. Maybe they changed their spring design or I somehow go a 22lb?
Hope this helps anyone who may encounter this again.
- February 6th, 2010, 3:45 pm
- Forum: General P-64 Discussion
- Topic: Reassembly Issue?
- Replies: 8
- Views: 6175
Reassembly Issue?
I should probably also mention it is working fine with the old recoil spring. I just tried to replace it with a 20lb one...
- February 6th, 2010, 3:41 pm
- Forum: General P-64 Discussion
- Topic: Reassembly Issue?
- Replies: 8
- Views: 6175
Reassembly Issue?
Hey all,
I order a P64 from MGS and I'm having a tough time getting the slide back on after field stripping the pistol. It seems like when I try and let the slide go forward it tries to ride up over the guide rails.
Is there a trick I don't know about to putting these things back together?
I order a P64 from MGS and I'm having a tough time getting the slide back on after field stripping the pistol. It seems like when I try and let the slide go forward it tries to ride up over the guide rails.
Is there a trick I don't know about to putting these things back together?
- January 22nd, 2010, 2:09 pm
- Forum: General P-64 Discussion
- Topic: Safety Operation Question
- Replies: 4
- Views: 3860
Safety Operation Question
Alright so it's not like a Sig's decocker then right?
After I de-cock then I have to take it off safe to fire in DA. Right?
After I de-cock then I have to take it off safe to fire in DA. Right?
- January 22nd, 2010, 1:08 pm
- Forum: General P-64 Discussion
- Topic: Safety Operation Question
- Replies: 4
- Views: 3860
Safety Operation Question
Hey all, I'm thinking about buying a P64 for CCW from Military Gun Supply. I was planning on replacing the springs to lighten up the DA. I have a quick question though. Is it possible to decock the gun using the decocker and then engage the safety? So essentially the gun would be in Double Action wi...